Analisa Pengembangan Sistem Pemantau Daya Listrik Berbasis IoT

  • Fenty Pandansari Politeknik ATMI Surakarta
  • Hoedi Prasetyo Politeknik ATMI Surakarta
  • Yustina Tri Tularsih Politeknik ATMI Surakarta

Abstract

The IoT-based power monitoring device is a device composed of a CT sensor of  type SCT-013, an AC-AC power adapter, an Arduino, and a Raspberry Pi. The tool is used to monitor voltage, current, frequency, real power, apparent power and power factor. The measured basic quantities are voltage, current, and frequency. The purpose of the measurement and monitoring processes is to conserve, control the quality, and control the use of electrical energy. In the measurement and monitoring process, tool accuracy is very important because it is closely related to the quality of electrical energy. This study presents an analysis of the accuracy of the power monitoring tool  according to the variations in voltage, current, and frequency at the source. The method used is to vary the voltage, current and frequency used as input to the system and compare the measurement results of the power monitor with the Fluke True RMS Multimeter. The test results show that the level of accuracy of the IoT-based power monitoring device on the voltage parameter is 99.1%, the current parameter is 98.75%-99.25% and the frequency is 100%, so it is a proper tool to measure the quality of electrical energy.

Keywords: power monitoring device, quality, accuracy, electrical energy

Downloads

Download data is not yet available.

References

Ahdan, S., & Susanto, E. R. (2021). Implementasi Dashboard Smart Energy Untuk Pengontrolan Rumah Pintar Pada Perangkat Bergerak Berbasis Internet of Things. Jurnal TEKNOINFO Vol.15 No. 1, 26-31.

Aldiansyah, Apriani, Y., & Saleh, Z. (2021). Monitoring Arus dan Tegangan Pembangkit Listrik Tenaga Surya Menggunakan Internet Of Things. Jurnal Teknik Informatika dan Sistem Informasi Vol. 8, No. 2, 889-896.

Anggaranie, G. (2017, November 03). https://supplychainindonesia.com/manfaat-internet-of-things-dan-potensinya-dalam-sektor-logistik-dan-transportasi/. Retrieved from https://supplychainindonesia.com: https://supplychainindonesia.com/manfaat-internet-of-things-dan-potensinya-dalam-sektor-logis

Biasrori, R., Arimbawa, I. A., & W, I. W. (2019). Sistem Pendukung Keputusan Konsumsi Listrik Dengan Implementasi IoT dan Fuzzy Rule Mining. JIRE (Jurnal Informatika & Rekayasa Elektronika), 60-69.

Cahyo, M. D., Ubaidillah, A., & Ibadillah, A. F. (2018). Rancang bangun Sistem Proteksi dan Monitoring Energi Listrik Berbasis Mikrokontroller Menggunakan Visual Studio Uji Coba diakses di PT. Pancawana Indonesia. CYCLOTRON , 1-6.

Damanik, I. A., Suratmadji, & K, A. J. (2020). Monitoring Energi Secara Realtime pada Mesin Berbasis IoT. Jurnal Teknologi Bahan dan Barang Teknik Vol.10, No.1, 1-8.

Handarly, D., & Lianda, J. (2018). Sistem Monitoring Daya Listrik Berbasis IoT. Journal of Eletrical Electronic Control and Automotive Engineering (JEECAE) Vol 3 No 2, 205-208.

http://www.lifud.com. (2021, 10 15). Retrieved from http://www.lifud.com: http://www.lifud.com/news/129

https://www.owon-smart.com. (2021, January 19). Retrieved from https://www.owon-smart.com: https://www.owon-smart.com/news/difference-between-wifi-bluetooth-and-zigbee-wireless/

Kementerian Komunikasi dan Informatika RI Direktorat Jenderal Aplikasi Informatika. (2020, Januari 28). https://aptika.kominfo.go.id/2020/01/revolusi-industri-4-0/. Retrieved from https://aptika.kominfo.go.id: https://aptika.kominfo.go.id/2020/01/revolusi-industri-4-0/

Lianda, J., Handarly, D., & Adam. (2019). Sistem Monitoring Konsumsi Daya Listrik Jarak Jauh Berbasis Internet of Things. JTERA (Jurnal Teknologi Rekayasa), Vol 4, No 1, 79-84.

Mudaliar, M. D., & Sivakumar, N. (2020). IoT based real time energy monitoring system using Raspberry Pi. Internet of Things, 1-16.

Nasar, M., Setyawan, N., Faruq, A., & Sulistiyowati, I. (2019). A SImple Real-Time Energy Analytics Model for Smart Building Using Open IoT Platforms. Jurnal Elektronika dan Telekomunikasi (JET), Vol. 19, No. 2, 83-90.

National Instruments Corp. (2019, Maret 14). https://www.ni.com/en-id/innovations/white-papers/06/understanding-instrument-specifications----how-to-make-sense-out.html#section--1769825186. Retrieved from https://www.ni.com/: https://www.ni.com/

Prasetyo, H. (2021). On-Grid Photovoltaic System Power Monitoring Based on Open Source and Low-Cost Internet of Things Platform. EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, Vol 08, Issue 01, 98-106.

Prasetyo, H., Tularsih, Y. T., & Pandansari, F. (2021). Design of Power Monitoring System Based on Internet of Things (IoT) with Calibration Interface. International Conference on ICT for Smart Society (ICISS) (pp. 1-5). : Bandung, Indonesia: IEEE.

Pratama, R., & Ali, M. (2019). Pengembangan Sistem Akuisisi Data Arus, Tegangan, Daya, dan Temperatur Pada Pembangkit Listrik Tenaga Surya. Jurnal Edukasi Elektro, Vol. 3, No. 2, 55-62.

Prayitno, B., Palupiningsih, P., & Agtriadi, H. B. (2019 ). Prototipe Sistem Monitoring Penggunaan Daya Listrik Peralatan Elektronik Rumah Tangga Berbasis Internet of Things. JURNAL PETIR Vol. 12, No. 1, 72-80.

PT Cloud Hosting Indonesia. (2019, September 18). https://idcloudhost.com/mengenal-apa-itu-internet-of-things-iot-defenisi-manfaat-tujuan-dan-cara-kerja/. Retrieved from https://idcloudhost.com: https://idcloudhost.com/mengenal-apa-itu-internet-of-things-iot-defenisi-manfaat-tujuan-dan-cara-kerja/

Purwania, I. B., Kumara, I. S., & Sudarma, M. (2020). Application of IoT-Based System for Monitoring Energy Consumption. International Journal of Engineering and Emerging Technology, Vol 5, No 2, 81-93.

Purwowibowo, & Prakosa, J. A. (2015). Prototipe Frekuensi Meter Rentang Ukur (10-2000) Hz terkalibrasi ke Standar Primer Frekuensi. INKOM, 11-20.

Putri, D. N., Junfithrana, A. P., Widjaya, M. S., Ningsih, Y. K., & Anggriawa, D. O. (2020). Perancangan dan Analisis Sistem Pemantauan Konservasi dan Efisiensi Energi Berbasis Internet of Things. Jetri: Jurnal Ilmiah Teknik Elektro Vol 18, No 02, 119-134.

Santoso, H. B., Prajogo, S., & Mursid, S. P. (2018). Pengembangan Sistem Pemantauan Konsumsi Energi Rumah Tangga Berbasis Internet of Things (IoT). ELKOMIKA, 357-366.

Suteja, W. A., & Antara, A. S. (2021). Analisis Sensor Arus Invasive ACS712 dan Sensor Arus Non Invasive SCT013 Berbasis Arduino. PROtek : Jurnal Ilmiah Teknik Elektro Vol 8. No 1, 13-21.

Published
2021-12-31
How to Cite
Fenty Pandansari, Prasetyo, H., & Tularsih, Y. T. (2021). Analisa Pengembangan Sistem Pemantau Daya Listrik Berbasis IoT. Jurnal Teknik, 19(2), 120-129. https://doi.org/10.37031/jt.v19i2.185
Abstract Views : 175 | Download PDF Views : 140