Karakteristik Massa Katup Limbah dan Tinggi Angkat Terhadap Efisiensi Pompa Hidram 3 Inci
Abstract
The research aim was to analyze the effect of the wastevalve mass and the deliver head on the hydram pump efficiency. The method used is the experimental method for the 3-inch hydram pump specimen, then analyzed using mathematical equations in the theory of the hydram pump on the head loss and pump efficiency. The data measured are the inflow, wastewater, and hydram pump outflow. The independent variables in this study were the wastevalve mass, namely 1.5 kg, 2.0 kg, 2.5 kg, and 3.0 kg, and deliver head, namely 3 m, 5 m, and 7 m. The results showed that the wastevalve mass and deliver head an effect on the hydram pump efficiency. The highest efficiency of the hydram pump is at a deliver head of 5 m with 1.5 kg of wastevalve mass, which is 60.60%. Meanwhile, the lowest hydram pump efficiency occurs at a deliver head of 7 m with 3.0 kg of wastevalve mass, which is 27.10%.
Downloads
References
Cahyanta, Y.A., dan Taufik, I. (2008). Studi terhadap prestasi Pompa Hidraulik Ram dengan variasi beban katup limbah, Jurnal Ilmiah Teknik Mesin CAKRAM, 2(2), 92-96.
Diwan, P., Patel, A., and Sahu, L. (2016). Design and fabrication of Hydraulic Ram with methods of improving efficiency. International Journal of Current Engineering and Scientific Research (IJCESR), 3(4), 5-13.
Hanafie, J., dan de Longh, H. (1979). Teknologi pompa Hydraolik Ram: Buku petunjuk untuk pembuatan dan pemasangan. Bandung: PTP-ITB Ganesha.
Harith, M. N., Bakar, R. A., Ramasamy, D., dan Ma Quanjin. (2017). A significant effect on f low analysis & simulation study of improve design hydraulic pump. 4th International Conference on Mechanical Engineering Research (ICMER2017), IOP Conference Series: Materials Science and Engineering.
Hussin, N.S.M., Gamil, S.A., Amin, N.A.M., Safar, M.J.A., Majid, M.S.A., Kazim, M.N.F.M., dan Nasir, N.F.M. (2017). Design and analysis of hydraulic ram water pumping system. In Proceedings of the International Conference on Applications and Design in Mechanical Engineering (ICADME 2017), Penang, Malaysia, 21-22 August 2017.
Inthachot, M. et al. (2015) Hydraulic ram pumps for irrigation. In Northern Thailand Agriculture and Agricultural Science Procedia 5, 107-114.
Jafri, M., Bale, J.S., and Thei, A.R. (2020). Experimental study of waste valves and delivery valves diameter effect on the efficiency of 3-inch Hydraulic Ram Pumps. International Journal of Fluid Machinery and Systems (IJFMS), 13(3), DOI: http://dx.doi.org/10.5293/ IJFMS.2020.13.3.615.
Jafri, M., dan Sanusi, A. (2019). Analysis effect of supply head and delivery pipe length toward the efficiency Hydraulic Ram 3 inches. International Research Journal of Advanced Engineering and Science, 4(2), 263-266, DOI: 10.5281/zenodo.3153468.
Jafri, M., Gusnawati, dan Banamtuan, A. (2016). Analisa beda tinggi
katup dan variasi diameter pipa inlet terhadap unjuk kerja Pompa
Hidram ukuran 2 inchi. LJTMU, 3(1), 71-76.
Kahar, K. (2017). Pengaruh jumlah katup hisap dan katup buang terhadap kinerja Pompa Hidram, Jurnal Pertanian Terpadu, 2, 92-103.
Rohan, D.B. et.all. (2015). Designing of Hydraulic Ram Pump. International Journal of Engineering and Computer Science 4(5), 1966-11971.
San, G.S. dan Santoso, G. (2003). Studi karakteristik volume tabung udara dan beban katup limbah terhadap efisiensi pompa Hydraulic Ram. Jurnal Teknik Mesin, 4(2), 81-87.
Seth, J. ( 2013). How to build a Hydraulic Ram Pump. LandToHouse.com.
Sulistiawan, E., Wahyudi, R.T., Pradana, S., dan Fuhaid, N. (2013). Pengaruh volume tabung udara dan beban katub limbah terhadap efisiensi unjuk kerja pompa hidram. PROTON, 5(2), 1-4.
Young, B. W. (1996). Journal of Power and Energy, 210, 245-248.
Copyright (c) 2020 Muhamad Jafri, Nurhayati, Dominggus G. H. Adoe, Gusnawati (Author)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
